SEC-ADW-535-2 Technical Brochure
Animated publication
SECURITON Heat Detection SEC-ADW-535 Technical Catalogue Version 2.0 2019
1. Line type heat detector Line Type Heat detector HEAT DETECTION SYSTEMS
The SecuriSens ADW 535 line-type heat detector combines a proven functional principle with the latest developments in sensor and processor technology.
The SEC-ADW-535 is an integrated line type heat detector with a response behaviour based on heat differential and/ or maximum heat. Thanks to its self-check feature and the periodic automatic test, the SEC-ADW-535 is particularly suitable for use in applications where the legally prescribed functional and maintenance checks cannot be performed due to the given ambient conditions or only with difficulty. A sensing tube filled with normal air is installed in the area to be monitored. A fully electronic pressure sensor perm nently records the pressure in the sensing tube and compares it with the alarm criteria.
Commissioning and configuration is done either directly on the device or via the comfortable ADW Config software tool for a perfect adaptation to existing environmental conditions. For planning the ADW HeatCalc software allows an optimized design of any installation. Technical data Operating voltage: 9 to 30 VDC Length of sensing tube: 115 m Relay contact: 50 VDC/1A (UL 30 VDC) Operating temperature evaluation unit: -30°C to +70°C Operating temperature sensing tube*: - 40 °C to +180 °C Dimensions (HxWxD): 160.5 x 250.5 x 134 mm Protection class of case: IP65 Case Color: Light grey (RAL 280 70 05) Charcoal (RAL 300 20 05) The SecuriSens ADW 535 line-type heat detector combines a proven functional principle with the latest developments in sensor and processor technology. A sensing tube filled with normal air is installed in the area to be monitored. A fully electronic pressure sensor permanently records the pressure in the sensing tube and compares it with the alarm criteria. Commissioning and configuration is done either directly on the device or via the comfortable ADW Config software tool for a perfect adaptation to existing environmental conditions. For planning the ADW HeatCalc software allows an optimized design of any installation. The HDx versions of the control unit are for installation inside Ex zones 2 and 22 and very harsh ambient conditions. Technical data Operating voltage: 9 to 30 VDC Length of sensing tube: 115 m (NFPA 72 200 m) Relay contact: 50 VDC/1A (UL 30 VDC) Operating temperature evaluation unit: -30°C to +70°C Operating temperature sensor tube*: -40°C to +180°C Dimensions (HxWxD): 260 x 160 x 134 mm Protection class of case: IP66 Case Color: graphite black (RAL 9011) platinum grey (RAL 7036) Weight (1 / 2 sensing tube): 1.5 kg / 1.97 kg Standar d s: EN 54-22 Class A1I, A2I,BI … GI UL, FM VdS-Approval: G 214076 *: Lower or higher temperature ranges are also possible subject to consultation with the manufacturer ActivFire Approved : AFP-3328
SEC-ADW-535-1 SEC-ADW-535-2 Line Type Heat Detector
one sensing tube two sensing tubes
Line Type Heat detector ATEX
The SecuriSens SEC-ADW-535 line-typ heat det c or combines a proven functional principle with the latest developments in sensor and processor technology. A sensing tube filled with normal air is installed in the area to be monitored. A fully electronic pressure sensor permanently records the pressure in the sensing tube and compares it with the alarm criteria. Commissioning and configuration is done either directly on the device or via the comfortable ADW Config software tool for a perfect adaptation to existing environmental conditions. For planning the ADW HeatCalc software allows an optimized design of any installation.
SEC-ADW-535-1
SEC-ADW-535-2
SEC-ADW-535-1HDx SEC-ADW-535-2HDx Line Type Heat Detector ATEX
one sensing tube two sensing tubes
6 Commissioning and configuration is done either directly on the device or via the comfortable ADW Config software tool for a perfect adaptation to existing environmental conditions. For planning the ADW HeatCalc software allows an optimized design of any installation. The HDx versions of the control unit are for installation inside Ex zones 2 and 22 and very harsh ambient conditions. The SecuriSens SEC-ADW-535 line-type heat detector combines a proven functional principle with the latest developments in sensor and processor technology. A sensing tube filled with normal air is installed in the area to be monitored. A fully electronic pressure sensor permanently records the pressure in the sensing tube and compares it with the alarm criteria.
SEC-ADW-535-1HDx
Weight: ADW 535-1HDx ADW 535-2HDx
3,05 kg 3,42 kg
Securiton Product Catalogue 201
Standar d s:
EN 54-22 Class A1I, A2I,BI … GI UL, FM
VdS-Approval: ATEX-Approval:
G 214076
II 3G Ex nA nC IIC T4 Gc II 3D Ex tc IIIC T135°C Dc
SEC-ADW-535-2HDx
*: Lower or higher temperature ranges are also possible subject to consultation with the manufacturer ActivFire Approved : AFP-3328
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972 Securiton Product Catalogue 2019 – ADW535
2
HEAT DETECTION SYSTEMS
The illustrated components are examples Overview of the linear heat detector SEC-ADW-535
3
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
according to directive 94/9/EG (ATEX 100a). Approval according to EN 54-22, heat sensor response class A1I, A2I, BI ... GI - Max. monitoring area = 800 m² - Max. sensor tube length per connection channel=115 m (Copper and stainless steel sensor tube) - Max. sensor tube length per connection channel=105 m (Teflon sensor tube) - One stub line per sensor tube possible - Service PC interface (Ethernet) - Surface-mounted housing Technical data Operating voltage: 9 to 30 VDC Power consumption quiescent: 35 mA at 24 VDC Operating temperature evaluation unit: -20°C to +40°C Operating temperature sensor tube: -40°C to +800°C Dimensions (HxWxD): 679 x 325 x 190 mm Protection class of case: IP65 Case Color: umbra grey (RAL 7022) pebble grey (RAL 7032) - Service PC interface (Ethernet) - Surf ce-m unted housing Technical data Oper ting voltage: 9 to 30 VDC Power consumption quiescent: 35 mA at 24 VDC Operating temperature evaluation unit: -20°C to +40°C Operating temperature sensor tube: -40°C to +800°C Dimensions (HxWxD): 679 x 325 x 190 mm Protection class of case: IP65 Case Color: umbra grey (RAL 7022) pebble grey (RAL 7032) Weight: 27 kg Type of protection: II G 2 Ex d e IIC T6 ATEX-Approval: Case: PTB 99 ATEX 1 57 Detonation guard: IBExU 06 ATEX 2003 X ART 535-10 For the temperature compensation the external temperature sensor ART 535 is to be used and placed in the monitored area. For temperature ranges and for EX applications a special version is to be used. (ART 535-30 Ex 400°C) Technical data Temperature range: - 50°C to 200°C Length cable: 10 m With the installation of an XLM 35, special fire detectors like ADWs can be ideally connected via the addressable loop to the SecuriFire fire alarm systems. The normative alarm transmission to the superordinate FACP is then accomplished via the XLM 35. The module comes with mounting brackets, screws and ribbon cable. The XLM 35 module allows also central configuration of special fire detectors with the Config Over Line function echnical data Operating Voltage from AMB 35: 5 VDC Maximum power consumption : 20 mA Dimensions (HxWxD): 95 x 58 x 17 mm Weight: 62 g The RIM 36 brings five (5) additional relay outputs to your Special Fire Detector. Expansion limit is two (2) RIM 35 / 10 relays. Each relay can be assigned to any ADW event by programming with the ADW Config software. The module comes with mounting brackets, screws and ribbon cable. Technical data Max. relay output load: 50 / 1 / 30 VDC/A/W Dimensions (HxWxD): 95 x 58 x 17mm Weight: 85 g ith the installation of an XLM 35, special fire detectors like ADWs can be ideally connected via the ad r ssable loop to the SecuriFire fire alarm systems. The normative alarm transmission to the superordinate FACP is then accomplished via the XLM 35. The module comes with mounting brackets, screws and ribbon cable. The XLM 35 module allows also c nt l configuration of s eci l fire detectors with the Config Over Line function Technical data Operating Voltage from AMB 35: 5 VDC Maximum power consumption : 20 mA Dimensions (HxWxD): 95 x 58 x 17 m Weight: 62 g The RIM 36 bri s five (5) additional relay outputs to your Special Fire Detector. Expansion limit is two (2) RIM 35 / 10 relays. Each relay can be assigned to any ADW event by programming with the ADW Config software. The module comes with mounting brackets, screws an ribbon cable. Technical data Max. relay output load: 50 / 1 / 30 VDC/A/W Dimensions (HxWxD): 95 x 58 x 17mm Weight: 85 g For the RS 485 networking of up to 250 Special Fire D tectors like ADW 535. Using the “ADW C nfig” configuration software, all ADWs in th network can be visualised and configured from a PC. The module comes with mounting brackets, screws and With the installation of an XLM 35, special fire detectors like ADWs can be ideally connected via the addressable loop to the SecuriFire fire alarm systems. The normative alarm transmission to the superordinate FACP is then accomplished via the XLM 35. The module com s with mounting brackets, screws and ribbon cable. Th XLM 35 module allows also central configuration of special fire detectors with the Config Over Line function Tech cal data Op rating Voltage from AMB 35: 5 VDC Maximum power consumption : 20 mA Dimensions (HxWxD): 95 x 58 x 17 mm Weig t: 62 g The RIM 36 brings five (5) additional relay outputs to your Special Fire Detector. Expansion limit is two (2) RIM 35 / 10 relays. Each relay can be assigned to any ADW event by programming with the ADW Config software. The module comes with mounting brackets, screws and ribbon cable. Technical data Max. r lay output load: 50 / 1 / 30 VDC/A/W Dimensions (HxWxD): 95 x 58 x 17mm Weight: 85 g Weight: 27 kg Type of protection: ATEX-Approval: Case: Detonation guard: II G 2 Ex d e IIC T6 PTB 99 ATEX 1057 IBExU 06 ATEX 2003 X ART 535-10 For the temperature compensation the external temperature sensor ART 535 is to be used and placed in the monitored area. For temperature ranges and for EX applications a special version is to be used. (ART 535-30 Ex 400°C) Technical data Temperature range: - 50°C to 200°C Length cable: 10 m For the RS 485 networking of up to 250 Special Fire Detectors like ADW 535. Using the “ADW Config” configuration software, all ADWs in the network can be visualised and configured from a PC. The module comes with mounting brackets, screws and Using the “ADW Config” configuration software, all ADWs in the network can be visualised and configured from a PC. The module comes with mounting brackets, screws and ribbon cables. Technical data Dimensions (HxWxD): 95 x 58 x 17 mm SMM 535 This interface connects the RS485 (over SIM 35) n tworked ADWs to a USB port of a PC. It is powered by 95 x 58 x 17 mm Weight: 56 g For the RS 485 networking of up to 250 Special Fire Detectors like ADW 535.
ACCESSORIES and SOFTWARE
SEC-ADW-535-1-ATEX Line Type Heat Detector ATEX Zone 1
8 SEC-RIM-36 The SEC-RIM-36 brings five (5) additional relay outputs to your Special Fire Detector. Expansion limit is two (2) SEC-RIM 36 / 10 relays. Each relay can be assigned to any ADW event by programming with the ADW Config software. The module comes with mounting brackets, screws and ribbon cable. Relay I/F module for Special Fire Detectors SEC-SIM-35 For the RS 485 networking of up to 250 Special Fire Detectors like SEC-ADW-535. Using the “ADW Config” configuration software, all ADWs in the network can be visualised and configured from a PC. The module comes with mounting brackets, screws and ribbon cables. Serial I/F Module networking of Special Fire Detectors temperature sensor SEC-ART-535 is to be used and placed in the monitored area. For temperature ranges and for EX applications a special version is to be used. (SC-ART-535-30 Ex 400°C) 8 SEC-XLM-35 With the installation of an SEC-XLM-35, special fire detectors like ADWs can be ideally connected via the addressable loop to the SecuriFire fire alarm systems. The normative alarm transmission to the superordinate FACP is then accomplished via the SEC-XLM-35. The module comes with mounting brackets, screws and ribbon cable. The XLM 35 module allows also central configuration of special fire detectors with the Config Over Line function. Loop I/F module for Special Fire Detectors Line-type heat detector with one sensor for the use in explosive atmosphere of the zone 1. (Category 2G) according to directive 94/9/EG (ATEX 100a). Approval according to EN 54-22, heat sensor response class A1I, A2I, BI ... GI - Max. monitoring area = 800 m² - Max. sensor tube length per connection channel =115 m (Copper and stainless steel sensor tube) - Max. sensor tube length per connection channel =105 m (Teflon sensor tube) - One stub line per sensor tube possible - Service PC interface (Ethernet) - Surface-mounted housing SEC-ART-535-10 For the temperature compensation the external External Temperature Sensor External Temperature Sensor
Loop I/F module for Special Fire Detectors XLM 35
External Temperature Sensor Loop I/F module for Special Fire Detectors XLM 35 Loop I/F module for Special Fire Detectors XLM 35
Relay I/F module for Special Fire Detectors RIM 36
Securiton Product Catalogue 20
Relay I/F module for Special Fire Detectors RIM 36 Relay I/F module for Special Fire Detectors RIM 36
Securiton Product Catalogue 20
Serial I/F Module networking of Special Fire Detectors SIM 35
Serial I/F Module networking of Special Fire Detectors SIM 35 ribbon cables. Technical data Dimensions (HxWxD): Serial I/F Module networking of Special Fire Detectors SIM 35 Serial Master Module for networking of Special Fire Detectors
ribbon cables. Technical data Dimensions (HxWxD): Weight: the USB port. Technical data Power Supply: Operating temperature: Dimensions (HxWxD): Securiton Product Catalogue 2019 – ADW535 SEC-SMM-535 This interface connects the RS485 (over SEC-SIM-35) networked ADWs to a USB port of a PC. It is powered by the USB port. Serial Master Module for networking of Special Fire Detectors
56 g
95 x 58 x 17 mm USB powered / 5 VDC -30°C to +60°C
Weight: Weight:
56 g 82 x 89 x 55 mm
165 g
4
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
Securiton Product Catalogue 2019 – ADW535
ACCESSORIES and SOFTWARE
3. Accessories
Copper tube
Stainless steel tube
Teflon tube
Flexible polyamide hose For the flexible connection between ADW and copper/stainless steel tube Temperature resistance + Chemical resistance + + Corrosion resistance + +
Application areas
Standard environments
High temperature environments
Standard and aggressive environments Temperature resistance + + Chemical resistance + + + Corrosion resistance + + +
Properties
Temperature resistance + + Chemical resistance – – Corrosion resistance + standard industrial applications Car park halls Loading platforms Road tunnels railway tunnels underground railway tunnels
Temperature resistance + + + Chemical resistance – Corrosion resistance + + Fertiliser industry Rubber industry Plastics processing industry Food processing industry Textile industry cellulose industry
Application areas
Standard industrial applications Bioengineering Chemical industry
As supply line to the detction area or for the thermal decoupling
Semiconductor industry Laboratory Engineering Medical engineering Pharmaceutical industry
Diameter outside (mm) Diameter inside (mm) Tube length (depending on application) Max. distance between pipe clamps
5
5
6
5
4
4
4
3
10 to 115 m (200 m not acc. EN)
10 to 115 m (200 m not acc. EN)
10 to 105 m (150 m not acc. EN)
0 to 20 m
0,8 m to 1,2 m
0,8 m to 1,2 m
0,5 m
0,5 m
Distance between pipe clamps and Screw-junction piece
≥ 10 cm each side
≥ 10 cm each side
≥ 20 cm each side
≥ 20 cm each side
Operating temperature Applicable in heat classes
-40°C to +180°C
-40°C to +300°C (higher temperatures on demand)
-40°C to + 260°C (PVDF -40 to +150°C)
-40°C to +100°C
A1-G
A1-G
A1, A2 and C
A1-G
Material
Cu-DHP R250
Stainless steel (1.4571)
Polytetrafluorethylen (PTFE)
Polyamide PA 12
Screw junction piece
Brass Brass
Stainless steel (1.4571) Stainless steel (1.4571)
PVDF or Brass PVDF or Brass
- -
End plug
Stiffener sleeve
-
-
Brass when used with Brass-junctions
Brass or Stainless steel (1.4571)
Test coil Pipe clamp
Cu-DHP R250
Stainless steel (1.4571) Polyamide (max. 85°C) Polypropylen (max. 100°C) or Stainless steel (1.4571)
-
-
Polyamide (max. 85°C) Polypropylen (max. 100°C) or Brass
Polyamide (max. 85°C) Polypropylen (max. 100°C) Brass or Stainless steel (1.4571) Brass; special adapter available AD ADW TU 6/4
Polyamide (max. 85°C) Polypropylen (max. 100°C)
Sensing tube connection ADW (standard delivery brass)
Brass
Brass (First part of tube Polyamide)
Brass
Necessary accessories
Connection set Screw-junction piece
-
-
1
-
– Same number as pipes – Per test coil +2 (If test coil connected at ADW +1) 1 per sensing tube
– Same number as pipes – Per test coil +2 (If test coil connected at ADW +1) 1 per sensing tube
- Same number as hoses -1
-1 per hose (If test coil connected at ADW +1)
End plug
1 per sensing tube 2 per tube part (only for brass junctions)
-
Stiffener sleeve
-
-
2 per hose part
Pipe clamps
Ca. 1 clamp per m depending on clamp distance (0.8-1.2m)
1,25 clamps per m depending on clamp distance (0.8-1.2m)
2 clamps per m
Ca. 1 clamp per m depending on clamp distance (0.8-1.2m)
Software
ADW HeatCalc
Type
Art.Nr.
ADW calculation& planning tool, Configuration and test software. Download from the Storebox / Partnerdata.
ADW-HeatCalc 11-1300005-01-01
Dongle for Securiton Applications (without license) Dongle for Securiton Applications (without license) ADW Dongle (User Level, Limited access rights)
Type
Art.Nr.
ULM-DP
VE100450
Type
Art.Nr.
ADW Config Basic License
LIC ADW VE100418 LIC ADW Prog VE100419
ADW Config Programming full access (only in combination with Basic License ADW available)
12
Securiton Product Catalogue 2019 – ADW535 LIC ADW Net VE100420
ADW Config Networking to configure and visualize
5
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
COPPER PARTS 3.1.Copper parts Standard sensing tube for applications with normal operating temperatures. –40°C– +180°C (When used at 85°C and above, use metallic pipe clamps). Sensing tube copper 5/4mm TU 5/4 Cu Tube to create the sensor part (straight piece 5.5m ) Technical data Diameter outside: 3.1.Copper parts Standard sensing tube for applications with normal operating temperatures. –40°C– +180°C (When used at 85°C and above, use metallic pipe clamps). Sensing tube copper 5/4mm TU 5/4 Cu Tube to create the sensor part (straight piece 5.5m ) Technical data Diameter outside: Diameter inside: 3.1.Copper parts Standard sensing tube for applications with normal operating temperatures. –40°C– +180°C (When used t 85°C and above, use metallic ipe clamps). Sensing tube copper 5/4mm TU 5/4 Cu Tube to cre te the sensor part (straight piec 5.5m ) echnical d a Diameter outside: Diameter inside: Length: 3.1. er arts Standard sensing tube for applic tions with normal operating tem eratures. –40°C– +180°C ( hen used at 85°C and above, use metallic pipe clamps). Sensing tube copper 5/4mm TU 5/4 Cu Tube to create the sensor part (straight piece 5.5m ) Technical data outside: 5 Diameter inside: 4 mm L ngth: 5,5 m M terial: copper Sensing tube copper 5/4mm TU 5/4 Cu 50 Tube to create the sensor part, 1 pcs. (coil 50m ) Technical data outside: 5 Diameter inside: 4 mm L ngth: 50 m M terial: copper Screw Junction straight for TU 5/4 Cu SJ 5/ Zn crew junction straight for TU 5/4 Cu 3.1.Copper parts Standard sensing tube for applications with normal operating temperatures. –40°C– +180°C (When used at 85°C and above, use metallic pipe clamps). Sensing tube copper 5/4mm TU 5/4 Cu Tube to create the sensor part (straight piece 5.5m ) Technical data Diameter outside: Diameter inside: Length: Material: Material: Sensing tube copper 5/4mm 5 mm 4 mm 5,5 m 4 mm 5,5 m copper 5,5 m copper 5,5 m copper Diameter inside: Material: Length: Material: TU 5/4 Cu 50 Tube to create the sensor part, 1 pcs. (coil 50m ) Technical data Diameter outside: TU 5/4 Cu 50 Tub to create the sensor part, 1 pcs. (coil 50m ) echnical d a Diameter outside: Diameter inside: copper Sensing tube copper 5/4mm TU 5/4 Cu 50 Tube to create the sensor part, 1 pcs. (coil 50m ) Technical data Diameter outside: TU 5/4 Cu 50 Tube to create the sensor part, 1 pcs. (coil 50m ) Technical data Diameter outside: Diameter inside: Diameter inside: Length: Material: Length: Material: 5 mm 4 mm 50 m 4 mm 50 m copper 50 m copper 50 m copper Diameter inside: Material: Screw Junction straight for TU 5/4 Cu SJ 5/4 CuZn Screw Junction straight for TU 5/4 Cu SJ 5/4 CuZn Length: Material: copper Screw Junction straight for TU 5/4 Cu SJ 5/4 CuZn Screw Junction straight for TU 5/4 Cu SJ 5/ Zn 5 mm 4 mm 4 mm Length: Sensing tube copper 5/4mm 5 mm 4 mm 4 mm Length: Screw junction straight for TU 5/4 Cu 5 mm 5 mm Sensing tube copper 5/4mm 5 mm 5 mm Screw junction straight for TU 5/4 Cu Screw junction straight for TU 5/4 Cu
Standard sensing tube for applications with normal operating temperatures. –40°C– +180°C (When used at 85°C and above, use metallic pipe clamps).
SEC-TU 5-4 Cu Tube to create the sensor part (straight piece 5.5m) Sensing tube copper 5/4mm
SEC-TU 5-4 Cu 50 Tube to create the sensor part, 1 pcs. (coil 50m) Sensing tube copper 5/4mm
SEC-SJ 5-4 CuZn Screw junction straight for SEC-TU 5/4 Cu Sensing tube copper 5/4mm
Screw junction straight for TU 5/4 Cu Technical data For pipe diameter: Technical data For pipe diameter: Material: Technical data For pipe diameter:
5 mm brass brass 10 pieces 10 pieces 10 pieces brass 10 pieces 10 pieces 5 mm brass brass 5 mm 5 mm 5 mm brass 5 pieces 5 pieces 5 pieces brass 5 pieces 5 pieces brass brass brass
Technical data For pipe diameter: Technical data For pipe diameter: Material: Packaging unit: Material: Packaging unit: Packaging unit: End plug for Junction straight for SJ 5/4 CuZn EP 5/4 CuZn Material: Packaging unit: End plug for Junction straight for SJ 5/4 CuZn EP 5/4 CuZn Material: End plug for Junction straight for SJ 5/4 CuZn EP 5/4 CuZn Packaging unit: End plug for Junction straight for SJ 5/4 CuZn EP 5/4 CuZn End plug for Junction straight for SJ 5/4 CuZn EP 5/4 CuZn Technical data Material:
End plug for SJ 5/4 CuZn Technical data Material: Packaging unit: Technical data Material: Technical data Material: Packaging unit: Technical data Material: Packaging unit: Packaging unit: TJ 5/4 CuZn T-Junction for TU 5/4 Cu echnical data Material: TJ 5/4 CuZn T-Junct on for TU 5/4 Cu Technical data Material: Packaging unit: TJ 5/4 CuZn -Junction for TU 5/4 Cu echnical data Material: TJ 5/4 CuZn T-Junction for TU 5/4 Cu Technical data Material: TJ 5/4 CuZn T-Junction for TU 5/4 Cu ech ical data Material: SC 5/4 Cu 5 Sensing coil of TU 5/4 Cu Technical data Length: C 5/4 Cu 5 Sensing coil of TU 5/4 Cu Technical data Length: End plug for SJ 5/4 CuZn End plug for SJ 5/4 CuZn End plug for SJ 5/4 CuZn nd plug for SJ 5/4 CuZn TC 5/4 Cu 10 Test coil of TU 5/4 Cu Technical data Length: C 5/4 Cu 10 Test coil of TU 5/4 Cu Technical data Length: Material: Material:
SEC-EP 5-4 CuZn End plug for SEC-SJ 5/4 CuZn Sensing tube copper 5/4mm
T-Junction for TU 5/4 Cu T-Junction for TU 5/4 Cu T-Junction for TU 5/4 Cu T-Junction for TU 5/4 Cu
SEC-TJ 5-4 CuZn T-Junction for SEC-TU 5/4 Cu T-Junction for SEC-TU 5/4 Cu
T-Junction for TU 5/4 Cu
brass brass brass brass
brass
Securiton Product Catalogue 2019 – ADW535 Securiton Product Catalogue 2019 – AD 535 Sensing-C il of TU 5/4 Cu 5 m Sensing-Coil of TU 5/4 Cu 5 m Securiton Product Catalogue 2019 – ADW535 Securiton Product Catalogue 2019 – ADW535
SEC-SC 5-4 Cu 5 Sensing coil of SEC-TU 5/4 Cu Sensing-Coil of SEC-TU 5/4 Cu 5 m
Securiton Product Catalogue 2019 – ADW535
5 m 5 m copper copper
Test-Coil of TU 5/4 Cu 10 m Test-Coil of TU 5/4 Cu 10 m
SEC-TC 5-4 Cu 10 Test coil of SEC-TU 5/4 Cu Test-Coil of SEC-TU 5/4 Cu 10 m
10 m 10 m copper copper
Material: Material:
6
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
STAINLESS STEEL PARTS
3.2.Stainless steel parts Sensor tube for applications in corrosive environments and in the food industry for hygienic reason –40 – +300°C (when used at 85°C and above, use metal pipe clamps). Sensing tube stainless steel 5/4mm TU 5/4 St Tube to create the sensor part (straight piece 3 m) Technical data Diameter outside: 5 mm Diameter inside: 4 mm Length: 3 m Material: stainless steel Screw Junction straight for TU 5/4 St SJ 5/4 St Screw junction straight for TU 5/4 St Technical data For pipe diameter: 5 mm Material: stainless steel End plug for SJ 5/4 St EP 5/4 St End plug for SJ 5/4 St Technical data Material: stainless steel T-Junction for TU 5/4 St TJ 5/4 St T-Junction for TU 5/4 St Technical data Material: stainless steel Protection screw PS TU 5/4 St Protection screw for the direct connection of sensing tube TU 5/4 St to the ADW 535 evaluation unit. 3.2.Stainless steel parts Sensor tube for applications in corrosive environments and in the food industry for hygienic reason –40 – +300°C (when used at 85°C and abo e, use met l pipe clamps). Sensing tube stainless steel 5/4mm TU 5/4 St Tube to create the sensor part (straight piec 3 m) Technical data Diameter outside: 5 mm ia eter inside: 4 Length: 3 m Material: stainless steel Screw Junction straight for TU 5/4 St SJ 5/4 St Screw junction straight for TU 5/4 St Technical data For pipe diameter: 5 mm Material: stainless steel End plug for SJ 5/4 St EP 5/4 St End plug for SJ 5/4 St Technical data Material: stainless steel T-Junction for TU 5/4 St TJ 5/4 St T-Junction for TU 5/4 St Technical data Material: stainless steel Protection screw PS TU 5/4 St Protection screw for the direct connection of sensing tube TU 5/4 St to the ADW 535 evaluation unit. 3.2.Stainless steel parts Sensor tube for applications in corrosive environments and in the food industry for hygienic reason –40 – +300°C (when used at 85°C and above, use metal pipe clamps). Sensing tube stainless steel 5/4mm U 5/4 St Tube to create the sensor part (straight piece 3 m) Technical data Diameter outside: 5 mm Diameter inside: 4 m Length: 3 m Material: stainless steel Screw Junction straight for TU 5/4 St J 5/4 St Screw junction straight for TU 5/4 St Technical data For pipe diameter: 5 mm Material: stainless steel End plug for SJ 5/4 St P 5/4 St End plug for SJ 5/4 St Technical data Material: stainless steel T-Junction for TU 5/4 St J 5/4 St T-Junction for TU 5/4 St Technical data Material: stainless steel Protection screw S TU 5/4 St Protection screw for the direct connection of sensing tube TU 5/4 St to the ADW 535 evaluation unit. 3.2.Stainless steel parts Sensor tube for applications in corrosive environments and in the food industry for hygienic reason –40 – +300°C (when u ed at 85°C and above, use metal pipe clamps). Sensing tube stainless steel 5/4mm TU 5/4 St Tube to create the sensor part (straight piece 3 m) Technical data Diameter outside: 5 m Di meter inside: 4 mm Length: 3 m Material: stainless steel Screw Junction straight for TU 5/4 St SJ 5/4 St Screw junction st aight for TU 5/4 St Technical data For pipe diameter: 5 mm Material: stainless steel End plug for SJ 5/4 St EP 5/4 St End plug for SJ 5/4 St Technical data Material: stainless steel T-Junction for TU 5/4 St TJ 5/4 St T-Junction for TU 5/4 St Technical data Material: stainless steel Protection screw PS TU 5/4 St Protection screw for the direct connection of sensing tube TU 5/4 St to the ADW 535 evaluation unit.
Sensor tube for applications in corrosive environments and in the food industry for hygienic reasons. –40 – +300°C (when used at 85°C and above, use metal pipe clamps).
SEC-TU 5-4 St Tube to create the sensor part (straight piece 6m) Sensing tube stainless steel 5/4mm
SEC-SJ 5-4 St Screw junction straight for SEC-TU 5/4 St Screw Junction straight for SEC-TU 5/4 St
SEC-EP 5-4 St End plug for SEC-SJ 5/4 St End plug for SEC-SJ 5/4 St
SEC-TJ 5-4 St T-Junction for SEC-TU 5/4 St T-Junction for SEC-TU 5/4 St
SEC-PS TU 5-4 St Protection screw for the direct connection of sensing tube SEC-TU 5/4 St to the SEC-ADW-535 evaluation unit. Protection screw
Sensing-Coil of TU 5/4 St Sensing-Coil of TU 5/4 St
SC 5/4 St 5 Sensing coil of TU 5/4 St Technical data Length: SC 5/4 St 5 Sensing coil of TU 5/4 St Technical data Length:
Securiton Product Catalogue 2019 – ADW535 Securiton Product Catalogue 2019 – ADW535 Securiton Product Catalogue 2019 – ADW535
SEC-SC 5-4 St 5 Sensing coil of SEC-TU 5/4 St Sensing-Coil of SEC-TU 5/4 St
5 m 5 m
Material: Material:
stainless steel stainless steel
Securiton Product Catalogue 2019 – ADW535
Test-Coil of TU 5/4 St Test-Coil of TU 5/4 St
TC 5/4 St 10 Test coil of TU 5/4 St TC 5/4 St 10 Test coil of TU 5/4 St
Including 4m of hardplastic tube FH 5/3 PA and junctions to connect the test coil with the ADW and the sensing tube. Technical data Length: 10 m Material: stainless steel Including 4m of hardplastic tube FH 5/3 PA and junctions to connect the test coil with the ADW and the sensing tube. Technical data Length: 10 m Material: stainless steel
SEC-TC 5-4 St 10 Test coil of SEC-TU 5/4 St Test-Coil of SEC-TU 5/4 St
7
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
TEFLON PARTS 3.3.Teflon parts Sensor tube for standard applications and for very corrosive and aggressive environments. –40 – +200°C (when used at more than 85°C, metal pipe clamps and brass screw-junction pi used; if more than 130 C the s rew-junction pieces must be outside of the mo itored area ). When using Teflon sensing tubes , only classes A1l to Bl are possible according to EN 54-22. Sensing tube teflon 6/4mm TU 6/4 PTFE 50 Tube to create the sensor part. (reel 50m). When used together with metal junctions, an according stiffener sleeve is necessary. Technical data Diameter outside: 6 mm Diameter insid : 4 mm Length: 50 Material: teflon Sensing tube teflon 6/4mm TU 6/4 PTFE 100 . . fl rt Sensor tube for standard applications and for very corrosive and aggressive environ ents. –40 – +200° ( hen used at ore than 85° , etal pipe clamps and brass screw-junction pi us d; f more than 130 C the scr -junction pieces ust be outside of the onitored area ). hen using Teflon sensing tubes , only classes A1l to Bl are possible according to EN 54-22. S nsing tube t fl n 6/4mm T 6/4 TF 50 Tube to create the sensor part. (reel 50 ). When used together ith etal junctions, an according stiffener sleeve is necessary. T chnical data Dia eter outside: 6 Dia eter inside: 4 mm Length: 50 aterial: teflon Sensing tube teflon 6/4mm TU 6/4 TF 100 w e u b 1 T ( D D 3.3.Teflon parts Sensor tube for standard applications and for very corrosive and aggressive environments. –40 – +200°C (when used at more than 85°C, metal pipe clamps and brass screw-junction pi us d; if ore than 130 C the scr w-juncti n pieces must be outside of the monitored area ). When using Teflon sensing tubes , only classes A1l to Bl are possible according to EN 54-22. Sensing tube teflon 6/4mm TU 6/4 PTFE 50 Tube to create the sensor part. (reel 50m). When used together with metal junctions, an according stiffener sleeve is necessary. Technical data Diameter outside: 6 mm Diameter inside: 4 mm Length: 50 m Material: teflon Sensing tube teflon 6/4mm TU 6/4 PTFE 100 3.3.Teflon parts Sensor tube for standard applications and for very corrosive and aggressive environments. –40 – +200°C (when used at more than 85°C, metal pipe clamps and brass screw-junction pi used; if more than 130 C the screw-junction pieces must be outside of the monitored area ). When using Teflon sensing tubes , ly classes A1l to Bl are possible according to EN 54-22. Sensing tube teflon 6/4mm TU 6/4 PTFE 50 Tube to create the sensor part. (reel 50m). When used together with metal junctions, an according stiffener sleeve is necessary. Technical data Diameter outside: 6 mm Diameter inside: 4 mm Length: 50 m Material: teflon Sensing tube teflon 6/4mm TU 6/4 PTFE 100 Tube to create the sensor part. When used together with metal junctions, an according stiffener sleeve is necessary. (reel 100m) Technical data Diameter outside: 6 mm Diameter inside: 4 mm Length: 100 Material: teflon Tube to create the sensor part. hen used together ith etal junctions, an according stiffener sleeve is necessary. (reel 100 ) Technical data Dia eter outside: 6 Dia eter inside: 4 mm Length: 100 aterial: teflon T m Tube to create the sensor part. When used together with metal junctions, an according stiffener sleeve is necessary. (reel 100m) Technical data Diameter outside: 6 mm Diameter inside: 4 mm Length: 100 m Material: teflon AD ADW TU 6/4 CuZn For the connection of a Teflon sensor tube with the ADW detection unit. Including 1 stiffener sleeve SS 4 CuZn. Technical data Material: brass Tube to create the sensor part. When used together with metal junctions, an according stiffener sleeve is necessary. (reel 100m) Technical data Diameter outside: 6 mm Diameter inside: 4 mm Length: 100 m Material: teflon AD ADW TU 6/4 CuZn For the connection of a Teflon sensor tube with the ADW detection unit. Including 1 stiffener sleeve SS 4 CuZn. Technical data Material: brass AD ADW TU 6/4 CuZn For the connection of a Teflon sensor tube with the ADW detection unit. Including 1 stiffener sleeve SS 4 CuZn. Technical data Material: brass SS 4 CuZn Stiffener sleeve for TU 6/4 PTFE Technical data Material: brass A T 6/4 uZ For the connection of a Teflon sensor tube ith the detection unit. Including 1 stiffener sleeve SS 4 CuZn. Technical data aterial: brass SS 4 CuZn Stiffener sleeve for T 6/4 TF Technical data aterial: brass D D A For S Adapter ADW-TU 6/4 CuZn Stiffener sleeve for TU 6/4 PTFE SS 4 CuZn Stiffener sleeve for TU 6/4 PTFE Technical data Material: SS 4 CuZn Stiffener sleeve for TU 6/4 PTFE Technical data Material: Screw junction straight PVDF for TU 6/4 PTFE Technical data For pipe diameter: Screw junction straight PVDF for TU 6/4 PTFE Technical data For pipe dia eter: S /4 brass b Screw junction straight PVDF for TU 6/4 PTFE SJ 6/4 PVDF Screw junction straight PVDF for TU 6/4 PTFE SJ 6/4 PVDF Screw junction straight PVDF for TU 6/4 PTFE SJ 6/4 PVDF cre junction straight PV F for T 6/4 TF J 6/4 F Screw junction straight PVDF for TU 6/4 PTFE Technical data For pipe diameter: Screw junction straight PVDF for TU 6/4 PTFE Technical data Fo pipe diamete : Material: Material: aterial: 6 mm Adapter ADW-TU 6/4 CuZn dapter -T 6/4 uZn Stiffener sleeve for TU 6/4 PTFE Stiffener sleeve for T 6/4 TF brass 6 mm 6 polyvinylidene fluoride polyvinylidene fluoride Securiton Product Catalogue 2019 – ADW535 Adapter ADW-TU 6/4 CuZn Stiffener sleeve for TU 6/4 PTFE 6 mm polyvinylidene fluoride
Sensor tube for standard applications and for very corrosive and aggressive environments. –40 – +200°C (when used at more than 85°C, metal pipe clamps and brass screw-junction pieces must be used; if more than 130 C the screw-junction pieces must be outside of the monitored area). When using Teflon sensing tubes, only classes A1l to Bl are possible according to EN 54-22.
SEC-TU 6-4 PTFE 50 Tube to create the sensor part. (reel 50m). When used together with metal junctions, an according stiffener sleeve is necessary. Sensing tube teflon 6/4mm
SEC-TU 6-4 PTFE 100 Tube to create the sensor part. (reel 100m). When used together with metal junctions, an according stiffener sleeve is necessary. Sensing tube teflon 6/4mm
SEC-AD ADWTU 6-4 CuZn For the connection of a Teflon sensor tube with the ADW detection unit. Including 1 stiffener sleeve SS 4 CuZn. Adapter SEC-ADW-TU 6/4 CuZn
SEC-SS 4 CuZn Stiffener sleeve for TU 6/4 PTFE Stiffener sleeve for SEC-TU 6/4 PTFE
SEC-SJ 6-4 PVDF Screw junction straight PVDF for SEC- TU 6/4 PTFE Screw junction straight PVDF for SEC-TU 6/4 PTFE
Material:
polyvinylidene fluoride
Securiton Product Catalogue 2019 – ADW535 Securiton Product atalogue 2019 – 535 End plug PVDF for SJ 6/4 PVDF
EP 6/4 PVDF End plug for SJ 6/4 PVDF SJ 6/4 PVDF is not included and has to be ordered separate. Technical data Material: polyvinylidene fluoride
Securiton Product Catalogue 2019 – ADW535
SEC-EP 6-4 PVDF End plug for SEC-SJ 6/4 PVDF. SEC-SJ 6/4 PVDF is not included and has to be ordered separate. End plug PVDF for SEC-SJ 6/4 PVDF
T-Junction PVDF for TU 6/4 PTFE
TJ 6/4 PVDF T-Junction for TU 6/4 PTFE Technical data Material:
polyvinylidene fluoride
Reduction compression ferrule for SJ 6/4 CuZn-FH 5/3 PA RE 6-5 CuZn
8
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
Reduction compression ferrule for FH 5/3 PA. To be used together with SJ 6/4 CuZn or TJ 6/4 CuZn
End plug for SJ 6/4 PVDF SJ 6/4 PVDF is not included and has to be ordered separate. Technical data Material: polyvinylidene fluoride P 6/4 PVDF End plug for SJ 6/4 PVDF SJ 6/4 PVDF is not included and has to be ordered s parate. Technical data Material: polyvinylidene fluoride EP / PVDF End plug for SJ 6/4 PVDF SJ 6/4 PVDF is not included and has to be ordered separate. Technical data Material: polyvinylidene fluoride P 6/4 PVDF End plug for SJ 6/4 PVDF SJ 6/4 PVDF is not included and has to be ordered separate. Technical data Material: polyvinylidene fluoride P 6/4 PVDF End plug for SJ 6/4 PVDF SJ 6/4 PVDF is not included and has to be ordered separate. Technical data Material: polyvinylidene fluoride
End plug PVDF for SJ 6/4 PVDF End plug PVDF for SJ 6/4 PVDF
TEFLON PARTS
T-Junction PVDF for TU 6/4 PTFE T-Junction PVDF for TU 6/4 PTFE T-Junction PVDF for TU 6/4 PTFE T-Junction PVDF for TU 6/4 PTFE T-Junction PVDF for TU 6/4 PTFE
TJ 6/4 PVDF T-Junction for TU 6/4 PTFE Technical data Material: J 6/4 PVDF -Junction for TU 6/4 PTFE Technical data Mate ial: TJ 6/4 PVDF T-Junction for TU 6/4 PTFE Technical data Material: J 6/4 PVDF T-Junction for TU 6/4 PTFE Technical data Material: J 6/4 PVDF T-Junction for TU 6/4 PTFE T chnical data Material:
SEC-TJ 6-4 PVDF T-Junction for SEC-TU 6/4 PTFE T-Junction PVDF for SEC-TU 6/4 PTFE
polyvinylidene fluoride polyvinylidene fluoride polyvinylidene fluoride polyvinylidene fluoride polyvinylidene fluoride
Reduction compression ferrule for SJ 6/4 CuZn-FH 5/3 PA RE 6-5 CuZn Reduction compression ferrule for SJ 6/4 CuZn-FH 5/3 PA E 6-5 CuZn Reduction compression ferrule for SJ 6/4 CuZn-FH 5/3 PA RE 6-5 CuZn Reduction compression ferrule for SJ 6/4 CuZn-FH 5/3 PA E 6-5 CuZn Reduction compression ferrule for SJ 6/4 CuZn-FH 5/3 PA E 6-5 CuZn Adapter-Set PA-Teflon (incl SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn) AD 5/6 CuZn-Set Adapter-Set PA-Teflon (incl SJ 6/4 , S4 CuZn, SS3 CuZn) AD 5/6 CuZn-Set Adapter-Set PA-Teflon (incl SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn) AD 5/6 CuZn-Set Adapter-Set PA-Teflon (incl SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn) D 5/6 CuZn-Set Adapter-Set PA-Teflon (incl SJ 6/4 CuZn, SS4 CuZn, S 3 CuZn) D 5/6 CuZn-Set T-Junction-Set Teflontube (incl. TJ 6/4 CuZn, SS4 CuZn) TJ 6/4 CuZn-Set T-Junction-Set Teflontube (incl. TJ 6/4 CuZn, SS4 CuZn) TJ 6/4 CuZn-Set T-Junction-Set Teflontube (incl. TJ 6/4 CuZn, SS4 CuZn) TJ 6/4 CuZn-Set T-Junction-Set Teflontube (incl. TJ 6/4 CuZn, SS4 CuZn) J 6/4 CuZn-Set T-Junction-Set Teflontube (incl. TJ 6/4 CuZn, SS4 CuZn) J 6/4 CuZn-Set Screw junction-Set Teflontube (incl SJ 6/4 CuZn, SS4 CuZn) SJ 6/4 CuZn-Set Screw junction-Set Teflontube (incl SJ 6/4 CuZn, SS4 CuZn) J 6/4 CuZn-Set Screw junction-Set Teflontube (incl SJ 6/4 CuZn, SS4 CuZn) J 6/4 CuZn- et Screw junction-Set Teflontube (incl SJ 6/4 CuZn, SS4 CuZn) J 6/4 CuZn-Set Screw junction-Set Teflontube (incl SJ 6/4 CuZn, SS4 CuZn) J 6/4 CuZn-Set
Reduction compression ferrule for FH 5/3 PA. To be used together with SJ 6/4 CuZn or TJ 6/4 CuZn Technical data Material: brass Reduction compression ferrule for FH 5/3 PA. To be used together with SJ 6/4 CuZn or TJ 6/4 CuZn Technical data Material: brass Reduction compression ferrule for FH 5/3 PA. To be used together with SJ 6/4 CuZn or TJ 6/4 CuZn Technical data Material: brass Reduction compression ferrule for FH 5/3 PA. To be used together with SJ 6/4 CuZn or TJ 6/4 CuZn Technical data Material: brass R duction compression ferrule for FH 5/3 PA. To be used together with SJ 6/4 CuZn or TJ 6/4 CuZn Technical data Material: brass Adapter set to connect the flexible hose FH 5/3 PA 25 from the ADW with the teflon sensing tube. Set includes: SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn Technical data Material: Adapter set to connect the flexible hose FH 5/3 PA 25 from the ADW with the teflon sensing tube. Set includes: SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn Technical data Material: Adapter set to connect the flexible hose FH 5/3 PA 25 from the ADW with the teflon sensing tube. Set includes: SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn Technical data Material: Adapter s t to connect the flexible hose FH 5/3 PA 25 from the ADW with the teflon sensing tube. Set includes: SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn Technical data Material: Adapter set to connect the flexible hose FH 5/3 PA 25 from the ADW with the teflon sensing tube. Set includes: SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn Technical data Material: brass: brass: brass: brass: brass: T-Junction set to connect 3 teflon tubes together. Set includes: TJ 6/4 CuZn, 3x SS4 CuZn Technical data Material: brass T-Junction set to connect 3 teflon tubes together. Set includes: TJ 6/4 CuZn, 3x SS4 CuZn Technical data Material: brass T-Junction set to connect 3 teflon tubes together. Set includes: TJ 6/4 CuZn, 3x SS4 CuZn Technical data Material: brass T-Junction set to connect 3 teflon tubes together. Set includes: TJ 6/4 CuZn, 3x SS4 CuZn Technical data Material: brass T-Ju ction set to connect 3 teflon tubes together. Set includes: TJ 6/4 CuZn, 3x SS4 CuZn Technical data Material: brass Screw junction set to connect 2 teflon tubes together. Set includes: SJ 6/4 CuZn, 2x SS4 CuZn Technical data Material: brass Screw junction set to connect 2 teflon tubes together. S t includes: SJ 6/4 CuZn, 2x SS4 CuZn Technical data Material: brass Screw junction set to connect 2 teflon tubes together. Set includes: SJ 6/4 CuZn, 2x SS4 CuZn Technical data Material: brass Screw junction set to connect 2 teflon tubes together. Set includes: SJ 6/4 CuZn, 2x SS4 CuZn Technical data Material: brass Screw junction set to connect 2 teflon tubes together. Set includes: SJ 6/4 CuZn, 2x SS4 CuZn Technical data Material: brass End plug set to close the end of the Teflontube. Set includes: SJ 6/4 CuZn, EP 6/4 CuZn, SS4 CuZn Technical data Material: brass SC 6/4 PTFE 5 Set F r i stallat on in sensing tubes for the monitoring of critical sources (facility or object monitoring) or for easy installation of at least 10 m sensor tubes in small rooms. M u ting material for the sensing coil is included (material poly mide): Support anch r, supp rt anchor plate and bracke . Technical data Length: 5 m Material: teflon Attention: Screw junction to connect the coil to the Teflon tube must be ordered separately End plug set to close the end of the Teflontube. Set includes: SJ 6/4 CuZn, EP 6/4 CuZn, SS4 CuZn Technical data Material: brass SC 6/4 PTFE 5 Set For installation in sensing tubes for the monitoring of critical sources (facility or object monitoring) or for easy installation of at least 10 m sensor tubes in small rooms. Mounting material for the sensing coil is included (material polyamide): Support anchor, support anchor plate and bracket. Technical data Length: 5 m Material: teflon Attention: Screw junction to connect the coil to the Teflon tube must be ordered separately
SEC-RE 6-5 CuZn Reduction compression ferrule for SEC-FH 5/3 PA. To be used together with SEC-SJ 6/4 CuZn or SEC-TJ 6/4 CuZn. Reduction compression ferrule for SEC-SJ 6/4 CuZn, SEC-FH 5/3 PA
Adapter-Set PA-Teflon (incl. SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn)
SEC-AD 5-6 CuZn-Set Adapter set to connect the flexible hose SEC-FH 5/3 PA 25
from the ADW with the teflon sensing tube. Set includes: SJ 6/4 CuZn, SS4 CuZn, SS3 CuZn
SEC-TJ 6-4 CuZn-Set T-Junction set to connect 3 teflon tubes together. Set includes: TJ 6/4 CuZn, 3x SS4 CuZn T-Junction-Set Teflontube (incl. TJ 6/4 CuZn, SS4 CuZn)
SEC-SJ 6-4 CuZn-Set Screw junction set to connect 2 teflon tubes together. Set includes: SJ 6/4 CuZn, 2x SS4 CuZn Screw junction-Set Teflontube (incl. SJ 6/4 CuZn, SS4 CuZn)
End plug-Set Teflontube (incl SJ 6/4 CuZn, EP 6/4 CuZn, SS4 CuZn) TS 6/4 CuZn-Set E d plug-Set Teflontube (incl SJ 6/4 CuZn, EP 6/4 CuZn, SS4 CuZn) TS 6/4 CuZn-Set
18 18 18 18 18
Securiton Product Catalogue 20 Securiton Product Catalogue 20 Securiton Product Catalogue 20 Securiton Product Catalogue 20 Securiton Product Catalogue 20
Sensing-Coil 6/4PTFE with mounting clip SEC-TS 6-4 CuZn-Set End plug set to close the end of the Teflontube. Set includes: SJ 6/4 CuZn, EP 6/4 CuZn, SS4 CuZn End plug-Set Teflontube (incl SJ 6/4 CuZn, EP 6/4 CuZn, SS4 CuZn) Sensing-Coil 6/4PTFE with mounting clip
SEC-SC 6-4 PTFE 5 Set For installation in sensing tubes for the monitoring of critical sources (facility or object monitoring) or for easy installation of at least 10 m sensor tubes in small rooms. Mounting material for the sensing coil is included (material polyamide) Support anchor, plate and bracket. Sensing-Coil 6/4PTFE with mounting clip
9
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
3.4.Polyamide parts Flexible Hose Polyamide 5/3mm 3.4.Polyamide parts Flexible Hose Polyamide 5/3mm 3.4. olya ide parts Flexible Hose Polyamide 5/3mm
POLYAMIDE PARTS
FH 5/3 PA 25 Flexible Hose to connect the ADW detection unit with the sensor part (Cu, St, PTFE) of the sensing tube. (reel 25m). To be used together with stiffener sleeve SS 3 CuZn or SS 3 St. Technical data Diameter outside: 5 mm Diameter inside: 3 mm Length: 25 m Material: polyamide FH 5/3 PA 25 Flexible Hose to connect the ADW detection unit with the sensor part (Cu, St, PTFE) of the sensing tube. (r el 25m). To be used together with s iffener sleeve SS 3 CuZn or SS 3 St. Technical data Diameter outside: 5 mm Diameter inside: 3 mm Length: 25 m Material: polyamide H 5/3 PA 25 Flexible Hose to connect the ADW detection unit with the sensor part (Cu, St, PTFE) of the sensing tube. (reel 25m). To be used together with stiffener sleeve SS 3 CuZn or SS 3 St. Technical data Diameter outside: 5 mm Diameter inside: 3 mm Length: 25 m Material: polyamide
SEC-FH 5-3 PA 25 Flexible Hose to connect the ADW detection unit with the sensor part (Cu, St, PTFE) of the sensing tube. (reel 25m). To be used together with stiffener sleeve SEC-SS 3 CuZn or SEC-SS 3 St. Flexible Hose Polyamide 5/3mm
Stiffener sleeve brass for FH 5/3 PA SS 3 CuZn Stiffener sleeve brass for FH 5/3 PA SS 3 CuZn Stiffener sleeve brass for FH 5/3 PA S 3 CuZn
Stiffener sleeve for FH 5/3 PA Stiffener sleeve for FH 5/3 PA Stiffener sleeve for FH 5/3 PA
SEC-SS 3 CuZn Stiffener sleeve for SEC-FH 5-3 PA Stiffener sleeve brass for FH 5/3 PA
Technical data Material: Packaging unit: Technical data Material: Packaging unit: Technical data Material: Packaging unit:
brass
brass 10 pieces brass 10 pieces 10 pieces
Stiffener sleeve stainless steel for FH 5/3 PA SS 3 St Stiffener sleeve stainless steel for FH 5/3 PA SS 3 St Stiffener sleeve stainless steel for FH 5/3 PA S 3 St
Stiffener sleeve for FH 5/3 PA Technical data Material: Stiffener sleeve for FH 5/3 PA Tech ical data Material: Stiffener sleeve for FH 5/3 PA Technical data Material:
SEC-SS 3 St Stiffener sleeve for FH 5/3 PA Stiffener sleeve stainless steel for FH 5/3 PA
stainless steel stainless steel stainless steel
INSTALLATION MATERIAL 4. Installation material Pipe clamp PC 5/6 PA 4. Installation material Pipe clamp PC 5/6 PA 4. Installation material Pipe clamp PC 5/6 PA To mount the sensing tube. echnical data For pipe diameter:
To mount the sensing tube. Technical data For pipe diameter: To mount the sensing tube. Technical data For pipe diameter: emperature range: Material: Temperature range: Material: Packaging unit: Temperature range: Packaging unit: Packaging unit: PC 5/6 St To mount the sensing tube. PC 5/6 St To mount the sensing tube. PC 5/6 St To mount the sensing tube. Technical data F r pipe diameter: Material:
5 mm
SEC-PC 5-6 PA To mount the sensing tube. Pipe clamp
5 mm polyamide 100 pieces polyamide 100 pieces -40 to +85°C polyamide 100 pieces 5 mm -40 to +85°C -40 to +85°C
Pipe clamp
Pipe clamp
Pipe clamp
SEC-PC 5-6 St To mount the sensing tube. Pipe clamp
5 mm
Technical data For pipe diameter: Technical data For pipe diameter: Material: Packaging unit: Material: Packaging unit:
5 mm 10 pieces 10 pieces 5 mm stainless steel stainless steel
Pipe clamp
Material:
Securiton Product Catalogue 20 Securiton Product Catalogue 20 stainless steel Securiton Product Catalogue 20 10 pieces
20 20 20
Packaging unit: PC 5/6 StG To mount the sensing tube. With brass stiffener. (delivery unit 10 Pipe clamps and 10 brass stiffener) PC 5/6 StG To mount the sensing tube. With brass stiffener. (delivery unit 10 Pipe clamps and 10 brass stiffener) PC 5/6 StG To mount the sensing tube. With brass stiffener. (delivery unit 10 Pipe clamps and 10 brass stiffener) echnical data For pipe diameter:
Pipe clamp
Pipe clamp
SEC-PC 5-6 StG To mount the sensing tube. With brass stiffener. (delivery unit 10 Pipe clamps and 10 brass stiffener) Pipe clamp
5 mm
Technical data For pipe diameter: Technical data For pipe diameter: Material: Packaging unit: Material: Packaging unit:
5 mm brass brass 10 pieces 10 pieces 10 pieces 5 mm brass
Material: ADW Sensing tube cleaning and mainte ance set ACMS 535 Packaging unit: ADW Sensing tube cleaning and maintenance set ACMS 535 ADW Sensing tube cleaning and maintenance set ACMS 535
ADW Sensing tube cleaning and maintenance set
SEC-ACMS 535 ADW Sensing tube cleaning and maintenance set. ADW Sensing tube cleaning and maintenance set
ADW Sensing tube cleaning and maintenance set
ADW Sensing tube cleaning and maintenance set
10
NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972
Made with FlippingBook Digital Publishing Software